Mar. 20, 2015

Ready for Take-Off: Teens Pilot Airplanes in New York City

by Ariel Zych

Click to enlarge images
“Now he has to try to land without hitting the GW Bridge; here comes the GW Bridge in front of him…Straighten out! Straighten out! Don’t hit the GW Bridge! Save the passengers!”
That’s what one 9th grader heard as he tried to pilot his passengers to safety aboard US Airways Flight 1549. It was a dramatic end to a January morning spent with Mr. Henry Rey’s aeronautics class at Frederick Douglass Academy in New York City.
For several hours, I had been watching teens like this one using flight simulation software to pilot commercial airliners over Manhattan and Queens. (If US Airways Flight 1549 rings a bell, that’s the one that Captain Chesley Sullenberger landed safely on the Hudson River after a flock of geese impaired its engines.) The students were divided into pairs: One monitored the radio, speed, and orientation of his or her aircraft, while the other provided guidance on how best to craft a descent into LaGuardia National Airport.
Each simulator setup consists of a large monitor display of a cockpit and a pilot’s chair seated in front of a radio console, alongside a throttle, yoke, and rudder. The simulators were running Prepar3D, an open flight simulation software package used to train commercial and military pilots and created by defense contractor giant Lockheed Martin. 
No part of this class is tied to the U.S. Military, or to commercial airlines like Delta, Southwest, or United Airlines. Instead, the students were completing flight missions as part of a unit on atmospheric layers and weather. Students had recently finished a study of how pressure and temperature change with altitude, and how those conditions relate to the ideal cruising altitudes and flight paths of various aircraft.
Most of the topics addressed in Mr. Rey’s class are routine in physical science and algebra classes, and could be taught without fancy flight simulators. But time spent on the devices reinforces certain lessons and also adds a fun incentive for completing assignments in a largely self-paced classroom. As students complete work and become more accomplished pilots, they get to design missions for novice peers and try their hand at piloting famously perilous flights of years past, like US Airways Flight 1549. Mr. Rey uses this innovative combination of STEM content and flight school to target students who are on track to graduate, but who haven’t been bitten by the STEM bug.
What really pulls students into classwork and gets them white-knuckling the simulator throttle is a much bigger prize—the promise of piloting a real plane. Class leaders are rewarded with logging actual flight time with Mr. Rey, who in addition to being a high school teacher is also a certified flight instructor. At the end of the school year, students who have distinguished themselves on the simulator are invited to fly a real plane under Mr. Rey’s instruction. “Any student here can tell you how many hours they’ve flown, or what they need to do in order to be able to fly,” Rey said. Warren, a sophomore who had been instructing a student in front of me, quickly volunteered his flight time from last school year: 6.2 hours. (He’s still got a long way to go: Federal aviation regulations require a minimum of 40 hours of flight time for a private pilot certificate.) 
Nadia, meanwhile, logged her first three hours of real flight in an experimental Lancer while sharing the cockpit with the man who built it. Describing the experience, Nadia, 18, was all smiles. “It was my first time being in an airplane and flying it, so I thought at first I would be scared, but I wasn’t,” she said. Nadia was first introduced to the simulators in the academy’s afterschool “flight club,” a not-for-credit option that gives students a chance to dip their toes into piloting. After taking Mr. Rey’s course and spending most of her free periods in the lab, her transition to the real deal was fairly effortless. “On the simulators, they have different types of aircraft, and they have the same type of aircraft that I was in,” she said. “It wasn’t all that different.” But there was one notable exception: sensitivity. “When I was actually turning [the plane], just a small adjustment would turn it more than I expected. At that point, I was a little more nervous,” she said. “Just a little.”
It’s unusual for a public school to offer a STEM program rolled into a flight course. Most schools don’t have teachers who moonlight as flight instructors, and finding administrative and financial support to train teachers in the simulation software poses a challenge. The cost of the simulators alone can present a significant barrier, with different models costing between $3,000 and $5,000 apiece.
At Frederick Douglass Academy, simulators were provided for free by HotSeat Chassis Inc., the company that makes them. Its CEO, Jay Leboff, has been marketing the simulators to other schools and districts for use as STEM labs or for afterschool flight clubs.
Rey and Leboff are collaboratively developing a curriculum that incorporates the simulators into instruction aligned with the Common Core and Next Generation Science Standards. Rey, however, was quick to point out that the benefits of flight training in the classroom extend beyond pure STEM knowledge. “Basically, this is a confidence builder,” he said. “Many of the students say, ‘Oh, I can’t do that.’ Then we say, ‘Yes, you can, and we’ll prove it to you.”
Related Links:
"Roger that Grandma" - Interview with one of the first female air traffic controllers 
About Ariel Zych

Ariel is Science Friday's education manager. She is a former teacher and scientist who spends her free time making food, watching arthropods, and being outside. You can follow her @arieloquent

The views expressed are those of the author and are not necessarily those of Science Friday.
EVAL ERROR: Entity: line 1: parser error : Space required after the Public Identifier

Entity: line 1: parser error : SystemLiteral " or ' expected

Entity: line 1: parser error : SYSTEM or PUBLIC, the URI is missing


line 1: package tmpevalpackage;
line 2: sub doEval { 
line 3: 	my($parent);
line 4: 	
line 5: 	if($LayoutManager::url_resolved_values{'SEGMENT.nickname'}) {
line 6: 		$parent = $LayoutManager::url_resolved_values{'SEGMENT.nickname'};
line 7: 	}
line 8: 	elsif($LayoutManager::url_resolved_values{'VIDEO.nickname'}) {
line 9: 		$parent = $LayoutManager::url_resolved_values{'VIDEO.nickname'};
line 10: 	}
line 11: 	elsif($LayoutManager::url_resolved_values{'DOCUMENT.nickname'}) {
line 12: 		$parent = $LayoutManager::url_resolved_values{'DOCUMENT.nickname'}
line 13: 	}
line 14: 	
line 15: 	if($parent) {
line 16: 		my(@books) = &Database::SelectClause('BOOK',"parent = $parent");
line 17: 		if(!@books) {
line 18: 			$parent = '';
line 19: 		}
line 20: 	}
line 21: 	
line 22: 	if(!$parent) {
line 23: 		my(@sel) = &Database::SelectClause('GLOBAL','record all ""');
line 24: 		if(@sel) {
line 25: 			$parent = 'GLOBAL.' . $sel[0];
line 26: 		}
line 27: 			$main::ENV{'reading_header'} = "FEATURED READING";
line 28: 	}
line 29: 	
line 30: 	 = '';
line 31: 	
line 32: 	if($parent) {
line 33: 		my(@books) = &Database::SelectClause('BOOK',"parent = $parent");
line 34: 		0 = 0;
line 35: 		my $dots;
line 36: 		foreach(@books) {
line 37: 			my(%data);
line 38: 			&Database::GetRow($_,'BOOK',\%data);
line 39: 			my($status,$title,$author,$url,$image,$width,$height) = &SciFri::Schema::getAmazonItem($data{'isbn'});
line 40: 			if($data{'title'}) {
line 41: 				$title = $data{'title'};
line 42: 			}
line 43: 			if($data{'author'}) {
line 44: 				$author = $data{'author'};
line 45: 			}
line 46: 			if($status eq 'ok') {
line 47: 				 .= "<div class=\"box-2x1-item box-slide\" data-href=\"$url\">";
line 48: 				 .= "	<div class=\"box-2x1-item-photo\">";
line 49: 				 .= "		<div class=\"image-wrapper\" data-jsclass=\"imageWrapper\" data-align=\"right\">";
line 50: 				 .= "			<img src=\"$image\" data-width=\"$width\" data-height=\"$height\">";
line 51: 				 .= "		</div>";
line 52: 				 .= "	</div>";
line 53: 				 .= "	<h4>$title</h4>";
line 54: 				if($author) {
line 55: 					 .= "	<p>by $author</p>";
line 56: 				}
line 57: 				 .= "	<div class=\"box-2x1-more-button\"><a href=\"$url\"><img src=\"/images/v1/icon_text_more_white.png\" width=47 height=15 border=0></a></div>";
line 58: 				 .= "</div>";
line 59: 				++0;
line 60: 			}
line 61: 		}
line 62: 	}
line 63: 	if($parent eq "GLOBAL.1") { $main::ENV{'reading_header'} = "FEATURED READING"; }
line 64: 	else { $main::ENV{'reading_header'} = "RELATED READING"; }
line 65:  };
line 66: &doEval();
line 67: 1;

Science Friday® is produced by the Science Friday Initiative, a 501(c)(3) nonprofit organization.

Science Friday® and SciFri® are registered service marks of Science Friday, Inc. Site design by Pentagram; engineering by Mediapolis.