Dec. 31, 2014

Picture of the Week: Planthopper Gears

by Rachel Nuwer

Click to enlarge images
Igor Siwanowicz, a research specialist at Janelia Farm Research Campus in Virginia, spends his working hours studying the neural anatomy of dragonflies. But he devotes much of his free time to nature photography, and is drawn to the abstract beauty of animals down to the microscopic level. When he read in 2013 that scientists had found a species of planthopper insect with the anatomical equivalent of mechanical gears—the first functional cogs ever discovered in nature—Siwanowicz desperately wanted to find and photograph one.
The gears have only been found in planthopper nymphs, rather than the adult form, and are made from the same material as the insects’ exoskeleton. These specialized structures, located on the inner part of the hind legs, enable nymphs to jump by synchronizing their hind leg movements to within 30 microseconds of each other—if one leg moves, the other does, too—allowing the insects to accelerate to around 400 to 500 times the force of gravity in just two milliseconds. “They have to synchronize their legs to move at exactly the same time, or else they’d go left or right instead of straight when they jump,” says Malcolm Burrows, a professor emeritus of zoology at the University of Cambridge in England and co-discoverer of the gears, found in a species called Issus coleoptratus.  
Burrows suspects that adult planthoppers don’t have gears because if one cog breaks, the insects can no longer jump. “If you’re a nymph, you go through four or five molts, which gives you the opportunity to grow a new set of gears,” he says. “If you’re an adult and a gear breaks, you’re a goner.”
Planthoppers are widely distributed around the world, and Siwanowicz eventually spied on his front porch a species that, though different from what Burrows studied, also had gears. He brought the nymph, which he identified as a green conehead planthopper, back to his workplace for a closer look using confocal laser scanning microscopy, an imaging technique that uses lasers to scan three-dimensional samples.
Siwanowicz first stained the planthopper with two fluorescent dyes that bind to chitin (a material in an insect’s exoskeleton). A laser then excited the dyes so that they emitted light—“it’s the same physical phenomenon that makes black light posters from the ’70s glow,” according to Siwanowicz. The microscope, which registers that light, took a series of images of the tiny specimen at an even tinier scale, layer by layer. The final step required digitally assembling those images into a single photo. The colors you see in the featured image above represent the various ways that the insect’s exoskeleton bound to the dyes, reflecting different structural properties of chitin.
Siwanowicz’s photograph wound up winning ninth place in the 2014 Olympus BioScapes International Digital Imaging Competition. What’s more, the authors of the original Science paper have been so impressed with his gear images that they’ve discussed a future collaboration. 
About Rachel Nuwer

Rachel Nuwer is a freelance science journalist who writes for outlets such as The New York Times, the BBC and Smithsonian. She lives in Brooklyn. Follow her @RachelNuwer

The views expressed are those of the author and are not necessarily those of Science Friday.
EVAL ERROR: Entity: line 1: parser error : Space required after the Public Identifier

Entity: line 1: parser error : SystemLiteral " or ' expected

Entity: line 1: parser error : SYSTEM or PUBLIC, the URI is missing


line 1: package tmpevalpackage;
line 2: sub doEval { 
line 3: 	my($parent);
line 4: 	
line 5: 	if($LayoutManager::url_resolved_values{'SEGMENT.nickname'}) {
line 6: 		$parent = $LayoutManager::url_resolved_values{'SEGMENT.nickname'};
line 7: 	}
line 8: 	elsif($LayoutManager::url_resolved_values{'VIDEO.nickname'}) {
line 9: 		$parent = $LayoutManager::url_resolved_values{'VIDEO.nickname'};
line 10: 	}
line 11: 	elsif($LayoutManager::url_resolved_values{'DOCUMENT.nickname'}) {
line 12: 		$parent = $LayoutManager::url_resolved_values{'DOCUMENT.nickname'}
line 13: 	}
line 14: 	
line 15: 	if($parent) {
line 16: 		my(@books) = &Database::SelectClause('BOOK',"parent = $parent");
line 17: 		if(!@books) {
line 18: 			$parent = '';
line 19: 		}
line 20: 	}
line 21: 	
line 22: 	if(!$parent) {
line 23: 		my(@sel) = &Database::SelectClause('GLOBAL','record all ""');
line 24: 		if(@sel) {
line 25: 			$parent = 'GLOBAL.' . $sel[0];
line 26: 		}
line 27: 			$main::ENV{'reading_header'} = "FEATURED READING";
line 28: 	}
line 29: 	
line 30: 	 = '';
line 31: 	
line 32: 	if($parent) {
line 33: 		my(@books) = &Database::SelectClause('BOOK',"parent = $parent");
line 34: 		0 = 0;
line 35: 		my $dots;
line 36: 		foreach(@books) {
line 37: 			my(%data);
line 38: 			&Database::GetRow($_,'BOOK',\%data);
line 39: 			my($status,$title,$author,$url,$image,$width,$height) = &SciFri::Schema::getAmazonItem($data{'isbn'});
line 40: 			if($data{'title'}) {
line 41: 				$title = $data{'title'};
line 42: 			}
line 43: 			if($data{'author'}) {
line 44: 				$author = $data{'author'};
line 45: 			}
line 46: 			if($status eq 'ok') {
line 47: 				 .= "<div class=\"box-2x1-item box-slide\" data-href=\"$url\">";
line 48: 				 .= "	<div class=\"box-2x1-item-photo\">";
line 49: 				 .= "		<div class=\"image-wrapper\" data-jsclass=\"imageWrapper\" data-align=\"right\">";
line 50: 				 .= "			<img src=\"$image\" data-width=\"$width\" data-height=\"$height\">";
line 51: 				 .= "		</div>";
line 52: 				 .= "	</div>";
line 53: 				 .= "	<h4>$title</h4>";
line 54: 				if($author) {
line 55: 					 .= "	<p>by $author</p>";
line 56: 				}
line 57: 				 .= "	<div class=\"box-2x1-more-button\"><a href=\"$url\"><img src=\"/images/v1/icon_text_more_white.png\" width=47 height=15 border=0></a></div>";
line 58: 				 .= "</div>";
line 59: 				++0;
line 60: 			}
line 61: 		}
line 62: 	}
line 63: 	if($parent eq "GLOBAL.1") { $main::ENV{'reading_header'} = "FEATURED READING"; }
line 64: 	else { $main::ENV{'reading_header'} = "RELATED READING"; }
line 65:  };
line 66: &doEval();
line 67: 1;

Science Friday® is produced by the Science Friday Initiative, a 501(c)(3) nonprofit organization.

Science Friday® and SciFri® are registered service marks of Science Friday, Inc. Site design by Pentagram; engineering by Mediapolis.